Products - Coating Products & Auxiliaries
Saish Metaflow offers a range of coating products and auxiliaries designed for a variety of applications. Our coating systems provide excellent casting results with low cleaning and fettling efforts along with other advantages. They help eliminate typical casting defects by specifically forming a pure barrier between the sand and metal.
Water-soluble Coating Products
FERROCOAT 212
Graphite based mould/core dressing with water as the carrier medium. Provides an uniform coating on the core/mould giving the castings an excellent smooth finish. It also provides an excellent coverage and does not drip after application.
FERROCOAT 530
Graphite based mould/core dressing with water as the carrier medium. It has a high graphite content to give a good peel of the coating from the casting surface and provides an uniform coating on the core/mould giving the castings an excellent smooth finish.
HIECOAT 210
Reddish coating based on iron oxide with water as the carrier medium. It has low reactivity and provides excellent performance at high temperatures giving a clean and smooth surface to the component.
HIECOAT 640
Reddish coating based on iron oxide and aluminium silicates with water as the carrier medium. It has low reactivity and provides excellent performance at high temperatures by allowing decomposition gases to escape giving a clean and smooth surface to the component.
SILCOAT 100
Zircon based mould/core coating in an aqueous carrier. Contains special binders and suspending agents and a high zircon content that provides a uniform, compact coating which is extremely abrasion resistant thereby providing smooth, gas free castings.
SILCOAT 210
Zircon and graphite based mould/core coating in an aqueous carrier. Contains special binders and suspending agents to give superior suspension characteristics with excellent brush ability and coverage.
Alcohol-soluble Coating Products
MOLDCOTE GB10
Graphite based coating product with alcohol as the carrier medium to give a smooth and clean finish. Its suspension and binder system gives the product good stability and performance preventing the formation of finings and scabs.
ISOCOAT 60
Zircon and graphite based coating product with alcohol as the carrier medium. It has good coverage and brush ability and gives a smooth finish even on heavy castings.
ISOCOAT 100
Zircon based coating product with alcohol as the carrier medium. It has excellent peel off with good suspension properties. The high zircon content gives excellent protection against penetrations and mould metal reactions.
SILCOAT 110
Zircon based mould/core coating with water as the carrier medium. It has an increased resistance to erosion through the formation of a hard coating film which is stable even at very high temperatures. It has a high zircon content which effectively shields the moulding material from the molten metal, giving smooth, clean and gas free castings.
Core Joining Pastes
COREBOND 80
Adhesive applied on cold cores to bond them within a normal hardening time. Can be used on a variety of sand binder backgrounds for ferrous and non-ferrous alloys.
COREBOND H2H
Adhesive applied on hot cores to bond them using a suitable clamping force. Can be used on a variety of sand binder backgrounds for ferrous and non-ferrous alloys.
CORESIL PASTE
Thick paste used to fill cracks, blow holes or any other improperly filled areas of the sand core or mould to obtain a smooth surface in a quick and convenient manner.
Aluminium Paints & Pastes
ALUMINIUM PASTE
Aluminium based coating product usually used on sand cores while casting intricate products like cylinder heads, manifolds, elbows, cylinder blocks etc. It acts as a heat bridge to carry heat to intricate areas of the casting, thereby eliminating warpage and giving it a smooth and clean finish. It is used after diluting in Solvanol SP.
ALUMINIUM PAINT SP
Aluminium based, ready-to-use, low viscosity coating product usually used on sand cores while casting intricate products like cylinder heads, manifolds, elbows, cylinder blocks etc. It helps in eliminating warpage and giving it a smooth finish. It has a moderate drying time with no settling of aluminium particles.
ALUMINIUM PAINT AP
Aluminium based, ready-to-use, low viscosity coating product usually used on sand cores while casting intricate products like cylinder heads, manifolds, elbows, cylinder blocks etc. It helps in eliminating warpage and giving it a smooth finish. It has a low drying time with no settling of aluminium particles.
SOLVANOL SP
Solvent for Aluminium Paint SP specially designed to prevent the settling of aluminium particles and give a moderate drying time with miniumum wastage of solvent through evaporation.
SOLVANOL AP
Solvent for Aluminium Paint AP specially designed to prevent the settling of aluminium particles and give a quick drying time.