Products - Fluxes

To help aluminium foundries deal with the melt treatment of their alloys, Saish Metaflow has developed a wide range of products to suit every alloy in any process. Our line of covering, drossing, grain refining and modifying fluxes are designed to meet the challenges of low smoke generation, high metal recovery, efficient dross removal, high crucible life, low casting porosity and so on.

Our focus is on constantly improving the performance efficiency of our fluxes to help our customers yield maximum profit with minimum impact on the environment.

Covering & Drossing Fluxes

COVERFLUX 5

For all aluminium alloys except those with a magnesium content of above 1%.

COVERFLUX 11XM

For all aluminium alloys except those with high magnesium content.

COVERFLUX 65

Sodium free covering and drossing flux for aluminium alloys with 2-6% magnesium.

COVERFLUX 340

Sodium free covering and drossing flux for aluminium alloys with 6-12% magnesium.

COVERFLUX Z

For zinc alloys.

Modifying Fluxes

COVERFLUX 290

For aluminium silicon alloys in the hypoeutectic range.

COVERFLUX 360

For aluminium silicon alloys in the eutectic range.

Degassing Agents

DEGAS 190

Degassing and grain refining agent for all aluminium alloys.

DEGAS 400

Degassing agent for aluminium alloys with low magnesium content.

DEGAS 600

Strong degassing agent for all aluminium alloys.

DEGAS CU50

Degassing agent and drossing flux for copper alloys.

Grain Refining Agents

NEWKLENT 20

For all aluminium alloys.

NEWKLENT 60

Grain refining agent using titanium for all aluminium alloys.

NEWKLENT 110

For hypereutectic aluminium silicon alloys with 13-25% silicon.

Magnesium Remover Flux

MAGLOW 4

For aluminium alloys with less than 1% magnesium.

MAGLOW 6

For aluminium alloys with more than 1% magnesium.